Welding high-tensile steel
Re: Welding high-tensile steel
Its not so much about who does the welding job, what's more important is to use the correct welding rod.
A welding rod similar to a eutectic 680 rod would be ideal, good luck finding a rod like that in Cambodia.
A 5kg box of Eutectic 680 welding rods would probably be worth more than your bike.
A local guy should be able to do a reasonable job for a couple of dollars........just don't kick too hard when starting your bike.
And yes, I am a qualified tradesman.
A welding rod similar to a eutectic 680 rod would be ideal, good luck finding a rod like that in Cambodia.
A 5kg box of Eutectic 680 welding rods would probably be worth more than your bike.
A local guy should be able to do a reasonable job for a couple of dollars........just don't kick too hard when starting your bike.
And yes, I am a qualified tradesman.
- vladimir
- The Pun-isher
- Posts: 6077
- Joined: Mon May 12, 2014 6:51 pm
- Reputation: 185
- Location: The Kremlin
Re: Welding high-tensile steel
Thanks, hotdigr, Brian at Smokey da Boar was very helpful, but at the moment he doesn't have the rods.Hotdigr wrote:I'm not a welder, but I know high tensile is not easy to weld. A fella I live with is a master welder. He's at work in Oz at the moment, but I just sent him an email to ask him if its possible and how it should be done ie: stick, MIG or TIG. I will let you know as soon as he gets back to me mate ( probably in the next day or two)
Jesus loves you...Mexico is great, right?
Re: Welding high-tensile steel
Here's his answer. Put it this way, if anyone is talking rods, ( ie: stick welding) go elsewhere
"If he can get the kickstarter, TIG would be better but there is no problem using a MIG. Just make sure the weld is full penetration and might be a good idea to weld a strong back on the kickstart"
"If he can get the kickstarter, TIG would be better but there is no problem using a MIG. Just make sure the weld is full penetration and might be a good idea to weld a strong back on the kickstart"
- vladimir
- The Pun-isher
- Posts: 6077
- Joined: Mon May 12, 2014 6:51 pm
- Reputation: 185
- Location: The Kremlin
Re: Welding high-tensile steel
Anyway I bought a replacement, I have to have reliable transport.
I have kept the cracked one, and would still like to have it welded.
I have kept the cracked one, and would still like to have it welded.
Jesus loves you...Mexico is great, right?
Re: Welding high-tensile steel
Hello All,
Well I finally cracked and got Vladimir do deliver his kick starter to me...........and joined this forum.
His original post regarding "high tensile" is quite a way off the mark.
Your average bolt generally come in two common forms...... mild steel or "high tensile".
A kick starter is hardly high tensile.
It is extremely high in carbon and needs better than a GP welding rod or basic mig/tig filler wire.
The now infamous kick starter will need welding in 3 different places (There is a tiny almost invisible hairline crack on the spline).
I just this month bought a brand new 350 amp 3 phase inverter mig welder.
With standard mig wire and Co2 gas that would be close to useless in welding this part.
I will have a go later this week using a low hydrogen welding rod (The brand is Gemini and they're made in Thailand).
Chances are by the weekend Vladimir will have either (a)a far from perfect but usable kick starter....or (b) a totally f**ked kick starter.
Cheers Murray.
Well I finally cracked and got Vladimir do deliver his kick starter to me...........and joined this forum.
His original post regarding "high tensile" is quite a way off the mark.
Your average bolt generally come in two common forms...... mild steel or "high tensile".
A kick starter is hardly high tensile.
It is extremely high in carbon and needs better than a GP welding rod or basic mig/tig filler wire.
The now infamous kick starter will need welding in 3 different places (There is a tiny almost invisible hairline crack on the spline).
I just this month bought a brand new 350 amp 3 phase inverter mig welder.
With standard mig wire and Co2 gas that would be close to useless in welding this part.
I will have a go later this week using a low hydrogen welding rod (The brand is Gemini and they're made in Thailand).
Chances are by the weekend Vladimir will have either (a)a far from perfect but usable kick starter....or (b) a totally f**ked kick starter.
Cheers Murray.
-
- Expatriate
- Posts: 4267
- Joined: Mon May 19, 2014 1:06 pm
- Reputation: 471
Re: Welding high-tensile steel
Thanks Murray, very informative.
In no way was I trying to sound like I knew what I was talking about.
That's why I sent him to the professionals.
In my line of work we have had Brian do some work for us and I can only recommend him and his team. They are one of the few companies in Cambodia that I can say I have had full service from, from start to finish. He is a top block who knows what he is talking about. I he can't so the job or is to busy to take the job on (which happens often) he will tell you. No bull shit.
If he can't do it he will point you in the direction of someone else that can.
Cambodia could do with more business owners with his ethic, and if someone asks about who can do a job that he could do I will always recommend him.
In no way was I trying to sound like I knew what I was talking about.
That's why I sent him to the professionals.
In my line of work we have had Brian do some work for us and I can only recommend him and his team. They are one of the few companies in Cambodia that I can say I have had full service from, from start to finish. He is a top block who knows what he is talking about. I he can't so the job or is to busy to take the job on (which happens often) he will tell you. No bull shit.
If he can't do it he will point you in the direction of someone else that can.
Cambodia could do with more business owners with his ethic, and if someone asks about who can do a job that he could do I will always recommend him.
- StroppyChops
- The Missionary Man
- Posts: 10598
- Joined: Tue May 06, 2014 11:24 am
- Reputation: 1032
Re: Welding high-tensile steel
Muzzaaaah.murray wrote:Hello All.
Bodge: This ain't Kansas, and the neighbours ate Toto!
- General Mackevili
- The General
- Posts: 18419
- Joined: Tue May 06, 2014 5:24 pm
- Reputation: 3416
- Location: The Kingdom
- Contact:
Re: Welding high-tensile steel
Welcome! Glad you signed up and joined in on the discussion!murray wrote:
....and joined this forum.
"Life is too important to take seriously."
"Life does not cease to be funny when people die any more than it ceases to be serious when people laugh."
Have a story or an anonymous news tip for CEO? Need advertising? CONTACT ME
Cambodia Expats Online is the most popular community in the country. JOIN TODAY
Follow CEO on social media:
Facebook
Twitter
YouTube
Google+
Instagram
"Life does not cease to be funny when people die any more than it ceases to be serious when people laugh."
Have a story or an anonymous news tip for CEO? Need advertising? CONTACT ME
Cambodia Expats Online is the most popular community in the country. JOIN TODAY
Follow CEO on social media:
YouTube
Google+
-
- Tourist
- Posts: 9
- Joined: Sun Jun 15, 2014 7:59 pm
- Reputation: 1
Re: Welding high-tensile steel
When my kick starter chewed half its spline teeth out in the middle of battambang and pailin, I just told the local kubota welder to weld it to the spline. He had a far better idea though which was to enlarge the gap in the bolt area (not the thread itself), and then the bolt could get enough grip and the two sides could close tightly. If you got the one you're thinking that you might need a sleeve for, this should sort you out.
And mines been fine since (2 years or so).
And mines been fine since (2 years or so).
- vladimir
- The Pun-isher
- Posts: 6077
- Joined: Mon May 12, 2014 6:51 pm
- Reputation: 185
- Location: The Kremlin
Re: Welding high-tensile steel
Hey Murray, thanks!
I would like to thank Brian for his troubles, if anyone is out there, please pin his place on Google maps, I'm sure this won't be the last time someone needs to find his place, and it will help with the sausage business.
I would like to thank Brian for his troubles, if anyone is out there, please pin his place on Google maps, I'm sure this won't be the last time someone needs to find his place, and it will help with the sausage business.
Jesus loves you...Mexico is great, right?
-
- Similar Topics
- Replies
- Views
- Last post
-
- 0 Replies
- 845 Views
-
Last post by CEOCambodiaNews
-
- 12 Replies
- 2721 Views
-
Last post by pissontheroof
Who is online
Users browsing this forum: beaker, phuketrichard, steevee and 254 guests