Help Wanted: Prototyping a cheap ebike for the people
- Duncan
- Sir Duncan
- Posts: 8149
- Joined: Tue Jun 03, 2014 8:22 pm
- Reputation: 2357
- Location: Wonder Why Central
Re: Help Wanted: Prototyping a cheap ebike for the people
monomial wrote: ↑Thu Apr 23, 2020 7:33 pmExcept in exceptional circumstances, such as when you have a very hard, non deformable wheel and very flat rolling surface, such as you might find with a steel wheel on a train track, the weight of a typical solar panel actually creates more rolling drag than the energy it can produce. So the idea of using cheap, polycrystalline cells to do this on deformable rubber wheels on asphalt is a net loss. Don't even think about it on dirt.Duncan wrote: ↑Fri Mar 20, 2020 10:36 am I'm looking forward to the day when cyclo's have '' electro assisted '' peddle power, with a solar panel and battery. It must be bloody hard for some of those old village guys to get that extra boost of speed that is needed sometimes, especially when there is a big fat mama with all her groceries riding in it.
There may be some very exotic and expensive monocrystalline cells that could make this viable, but you are looking at serious $$$. There are also some new organic polymer cells that might have a chance, but they are still in the lab and likely a decade away from commercialization. A lightweight, high density battery and fixed location rapid charging stations is the only practical idea at the moment.
Are you telling me a cyclo [ or tuk-tuk ] that sits in the sun waiting for a passenger for 8 hours will not get enough sun on it's solar panel to keep the battery fully charged, so it can do a few trips that are usually only a few hundred metres long. On a cyclo it would only assist the driver while he is still peddling , the same as some electric bikes with peddles,, as I have seen here in OZ.
Cambodia,,,, Don't fall in love with her.
Like the spoilt child she is, she will not be happy till she destroys herself from within and breaks your heart.
Like the spoilt child she is, she will not be happy till she destroys herself from within and breaks your heart.
Re: Help Wanted: Prototyping a cheap ebike for the people
I had noticed these bikes years back in Siem Reap. It maybe an alternative for the foreign traveller since there they can not rent a motorcycle nor ride in Angkor Park, but it comes in at double money (but that's irrelevant if you can't hire a petrol motor) the price for a full 24 hours is only 10$/ electric bike. that also only seats one person.beaker wrote: ↑Tue Mar 24, 2020 1:02 pmThey are getting them via China and are doing the usual Khmer selling scam of not actually having them in stock but you have to pre-order then they will order at wholesale price and then double it +.offroadscholar wrote: ↑Tue Mar 24, 2020 12:42 pmHere's a Cambodian company that makes ebikes.stevenfalcons wrote: ↑Fri Mar 20, 2020 1:20 am Hi everyone,
I want to bring more ebike to the people. I am thinking about protyping a cheap ebike, mostly made with easily available local parts. I am also thinking about adding battery assisted package to old trailer or bicycle, promoting electric mobilities.
Is there anyone interested in this kind of project?
Any help is appreciated.
I dont know anything about them other than whats on the website
http://voltramotors.com/
They do the easy assembly from the package and claim they are made in Cambodia.
https://opaisales.en.made-in-china.com/ ... V12ah.html
Too me, it seems to be aimed naturally in having a cleaner environment, and rightly so, it would be in most peoples main interests (don't quote me please on petrol sellers). But the problems with the product and in normal save our environment, being responsible and green if you would use the term, are costs in development, but overall the customer who want to protect the environment needs deep pockets to do so at this time.
It's been quote that the e-bike comes from China. The Voltra site says the following-
VOLTRA is born of a French engineer whose story begins in 2013 when he sets his bags in Cambodia. In 2014, he created the first electric bike rental company in Siem Reap to visit the temples of Angkor. But this French engineer does not want to stop along the way and decides with all these technological skills to create the first Cambodian brand of electric scooters. For 3 years, research and travel allow him to create a brand that can compete with major international brands.
http://voltramotors.com/
http://www.greene-bike.com/index.html
The Delfast has the mileage on its side, but at around the $4000 price mark that goes against it for many I would think, being that it is a bicycle in the end.
offroadscholar, you are the person in the know, may I ask what millage you get again from your bike, and what is the overall cost of something like you have?
What of the OP is he still doing anything on the project?
Always "hope" but never "expect".
Re: Help Wanted: Prototyping a cheap ebike for the people
I'm saying if that is your model it makes a heck of a lot more sense for that to be a fixed charging station. Otherwise, you are paying the penalty of hauling all that weight around when it is much more efficient to leave it behind.Duncan wrote: ↑Fri Apr 24, 2020 4:08 ammonomial wrote: ↑Thu Apr 23, 2020 7:33 pmExcept in exceptional circumstances, such as when you have a very hard, non deformable wheel and very flat rolling surface, such as you might find with a steel wheel on a train track, the weight of a typical solar panel actually creates more rolling drag than the energy it can produce. So the idea of using cheap, polycrystalline cells to do this on deformable rubber wheels on asphalt is a net loss. Don't even think about it on dirt.Duncan wrote: ↑Fri Mar 20, 2020 10:36 am I'm looking forward to the day when cyclo's have '' electro assisted '' peddle power, with a solar panel and battery. It must be bloody hard for some of those old village guys to get that extra boost of speed that is needed sometimes, especially when there is a big fat mama with all her groceries riding in it.
There may be some very exotic and expensive monocrystalline cells that could make this viable, but you are looking at serious $$$. There are also some new organic polymer cells that might have a chance, but they are still in the lab and likely a decade away from commercialization. A lightweight, high density battery and fixed location rapid charging stations is the only practical idea at the moment.
Are you telling me a cyclo [ or tuk-tuk ] that sits in the sun waiting for a passenger for 8 hours will not get enough sun on it's solar panel to keep the battery fully charged, so it can do a few trips that are usually only a few hundred metres long. On a cyclo it would only assist the driver while he is still peddling , the same as some electric bikes with peddles,, as I have seen here in OZ.
I am saying that you can not collect enough energy while moving to offset the drag induced by the weight of the panel. So since you have to sit in place anyway, you might as well sit in place by a fixed charging station. That is the optimal solution.
Re: Help Wanted: Prototyping a cheap ebike for the people
If you are serious about doing something like an e-Bike, here is what I would recommend you investigate. Forget everything about solar panels. That is a dead end. Even rechargeable Li-Ion batteries are likely not where you want to go.
Instead, concentrate on making a simple and cheap reduction furnace that can crank out lightweight aluminum air batteries from expended aluminum oxide plates. Then on your bike, submerge those aluminum air battery plates in a thin layer of oil. When you are ready to use them, dunk them in water to clear the oil and then slide them into the electrolyte for the trip.
Aluminum air batteries are much lighter than Li-Ion. Only recharging them is a challenge. Figure out a low cost process and infrastructure to recharge, and you have a genuine, viable technology. Let the recharging be done at fixed locations, and you only need to carry around the weight of the aluminum plates and the electric motor on the bike itself.
Instead, concentrate on making a simple and cheap reduction furnace that can crank out lightweight aluminum air batteries from expended aluminum oxide plates. Then on your bike, submerge those aluminum air battery plates in a thin layer of oil. When you are ready to use them, dunk them in water to clear the oil and then slide them into the electrolyte for the trip.
Aluminum air batteries are much lighter than Li-Ion. Only recharging them is a challenge. Figure out a low cost process and infrastructure to recharge, and you have a genuine, viable technology. Let the recharging be done at fixed locations, and you only need to carry around the weight of the aluminum plates and the electric motor on the bike itself.
- Duncan
- Sir Duncan
- Posts: 8149
- Joined: Tue Jun 03, 2014 8:22 pm
- Reputation: 2357
- Location: Wonder Why Central
Re: Help Wanted: Prototyping a cheap ebike for the people
monomial wrote: ↑Fri Apr 24, 2020 10:15 pmI'm saying if that is your model it makes a heck of a lot more sense for that to be a fixed charging station. Otherwise, you are paying the penalty of hauling all that weight around when it is much more efficient to leave it behind.Duncan wrote: ↑Fri Apr 24, 2020 4:08 ammonomial wrote: ↑Thu Apr 23, 2020 7:33 pmExcept in exceptional circumstances, such as when you have a very hard, non deformable wheel and very flat rolling surface, such as you might find with a steel wheel on a train track, the weight of a typical solar panel actually creates more rolling drag than the energy it can produce. So the idea of using cheap, polycrystalline cells to do this on deformable rubber wheels on asphalt is a net loss. Don't even think about it on dirt.Duncan wrote: ↑Fri Mar 20, 2020 10:36 am I'm looking forward to the day when cyclo's have '' electro assisted '' peddle power, with a solar panel and battery. It must be bloody hard for some of those old village guys to get that extra boost of speed that is needed sometimes, especially when there is a big fat mama with all her groceries riding in it.
There may be some very exotic and expensive monocrystalline cells that could make this viable, but you are looking at serious $$$. There are also some new organic polymer cells that might have a chance, but they are still in the lab and likely a decade away from commercialization. A lightweight, high density battery and fixed location rapid charging stations is the only practical idea at the moment.
Are you telling me a cyclo [ or tuk-tuk ] that sits in the sun waiting for a passenger for 8 hours will not get enough sun on it's solar panel to keep the battery fully charged, so it can do a few trips that are usually only a few hundred metres long. On a cyclo it would only assist the driver while he is still peddling , the same as some electric bikes with peddles,, as I have seen here in OZ.
I am saying that you can not collect enough energy while moving to offset the drag induced by the weight of the panel. So since you have to sit in place anyway, you might as well sit in place by a fixed charging station. That is the optimal solution.
Great information there. When I see cyclo drivers I will tell them that.
Cambodia,,,, Don't fall in love with her.
Like the spoilt child she is, she will not be happy till she destroys herself from within and breaks your heart.
Like the spoilt child she is, she will not be happy till she destroys herself from within and breaks your heart.
Re: Help Wanted: Prototyping a cheap ebike for the people
And not only that but according to Michael More's new film its all a scam and a ripoff anyway.
- phuketrichard
- Expatriate
- Posts: 16853
- Joined: Wed May 14, 2014 5:17 pm
- Reputation: 5767
- Location: Atlantis
Re: Help Wanted: Prototyping a cheap ebike for the people
In Bangkok; lots of selections/options.
https://www.bkkebike.com/?fbclid=IwAR2_ ... _aiCexsqs8
kit price lists
https://c8a5c1e3-8f89-4be7-8bf5-db7b663 ... cf3bef.pdf
https://www.bkkebike.com/?fbclid=IwAR2_ ... _aiCexsqs8
kit price lists
https://c8a5c1e3-8f89-4be7-8bf5-db7b663 ... cf3bef.pdf
In a nation run by swine, all pigs are upward-mobile and the rest of us are fucked until we can put our acts together: not necessarily to win, but mainly to keep from losing completely. HST
-
- Expatriate
- Posts: 333
- Joined: Sun Jul 23, 2017 1:55 pm
- Reputation: 92
Re: Help Wanted: Prototyping a cheap ebike for the people
Solar bikes make presence in Cambodia, courtesy of Kore Energy Agency
The Korea Energy Agency announced on April 22 that it will invest 10 billion won this year in a project aimed at supplying electric bikes and building solar charging stations in Cambodia.
The agency has been conducting a pilot project in Phnom Penh and Siem Reap, a popular tourist town close to the world-famous “Angkor Wat,” since October last year.
The electric bike supply project is designed to export photovoltaic (PV) systems, charging stations and electric bikes in a package.
The agency has set up a 5-kW PV system and a charging station with three electric bikes near the Phnom Penh Government Office, and has three 2.5-kW PV facilities one charging station and three electric bikes near Angkor Wat.
Through this project, the agency will increase the number of Korean-type solar bikes in Cambodia to 1,000 units first, and then expand charging stations to 30 and electric motorcycles to 4,000 units in the long term.
The agency also signed an MOU on business cooperation with SK Securities and Verywords on April 16 to finance the expansion of the Cambodian project.
The agency plans to introduce solar electric bikes not only to neighboring countries such as Vietnam and Indonesia but to Asian markets such as China and India, with Cambodia as the main base. According to Global Market Insight, a market research institute, the global electric bike market is expected to grow 5 percent annually by 2024.
https://www.khmertimeskh.com/50716918/s ... gy-agency/
Re: Help Wanted: Prototyping a cheap ebike for the people
This is interesting I thought. Good hobby for someone wanting to pass the time. Plans there too.
Get the plans here (3D Sketchup CAD only): https://resystech.com/electric-motorcycle
Get the plans here (3D Sketchup CAD only): https://resystech.com/electric-motorcycle
Always "hope" but never "expect".
- Jerry Atrick
- Expatriate
- Posts: 5434
- Joined: Sat May 17, 2014 4:19 pm
- Reputation: 3051
Re: Help Wanted: Prototyping a cheap ebike for the people
What's 120HPH in miles then, lol?
-
- Similar Topics
- Replies
- Views
- Last post
-
- 13 Replies
- 4626 Views
-
Last post by ressl
-
- 1 Replies
- 1910 Views
-
Last post by rockyboy612
-
- 15 Replies
- 3540 Views
-
Last post by Kangaruchi
-
- 19 Replies
- 4406 Views
-
Last post by Ghostwriter
-
- 1 Replies
- 1316 Views
-
Last post by John Bingham
-
- 16 Replies
- 2716 Views
-
Last post by Doc67
-
- 2 Replies
- 2044 Views
-
Last post by IraHayes
Who is online
Users browsing this forum: No registered users and 117 guests